BENI rendered in ARMOR
Mobile & Legged wheeled legged biped self-balancing open source 8 DOF

BENI

by Mondo Robotics

Mondo Robotics' BENI — a small wheeled-legged robot with a drive wheel on each two-joint leg and a yaw-and-roll head, released with its reinforcement-learning training code.

Add to ARMOR

10 files 16.5 MB download

Opens in the ARMOR app on iPhone, iPad, or Mac. Don’t have it yet? Get ARMOR.

Model

10Links
8Joints
8Actuated DOF
8Meshes

Mesh formats: OBJ

BENI is a small wheeled-legged robot from Mondo Robotics, a camera robot that balances and rolls on two wheeled legs and can jump. Mondo Robotics published its model alongside the training code and trained policies in the open-beni repository, which also runs the robot in a browser game.

The mechanism

Each leg has a hip joint (L1 or R1), a knee joint (L2 or R2), and a continuous wheel joint (LW or RW) at its end. The head adds a yaw and a roll joint, for eight actuated degrees of freedom in all. There are no mimic joints and no closed kinematic loops. The head’s roll joint can move only ±0.05 rad (about ±3°), and its yaw joint has a torque limit of 0.1 N·m; both are as the author published them.

About this file — read before importing

This links directly to the assets/beni_base folder of Mondo Robotics’ open-beni repository. The same folder holds the MuJoCo model that the project’s training code loads; this URDF has the same joints, limits, and masses. ARMOR links directly to that repository rather than re-hosting anything, so what you get is exactly what Mondo Robotics publishes, unmodified.

License & attribution

Source code
MIT
Model & mesh files
MIT
Attribution
open-beni — Copyright (c) 2026 Open Beni — MIT License, per the repository's own LICENSE file.

ARMOR does not host or redistribute this model. Choosing “Open in ARMOR” downloads the files directly from Mondo Robotics’s own repository, unmodified. Your use of the model is governed by the license above.

Read the full license →
ARMOR is an independent tool published by DCDC LLC. It is not affiliated with, sponsored by, or endorsed by Mondo Robotics. "Mondo Robotics" and "BENI" are used here only to identify the robot this file describes. This model is downloaded directly from Mondo Robotics' own repository under the MIT License, which you accept by downloading.

Looking for a different robot? Find more URDF sources or browse the rest of the gallery.